OUR PRODUCTS
Multi-point Bucket Elevator
Multi-point Bucket Elevator
Product introduction
It is suitable for lifting from low to high. Material can be transported upward automatically and continuously after uniform input. The transmission speed can be adjusted according to the transmission volume, and the lifting height can be selected as needed. All sizes are designed and manufactured according to the actual needs.
According to the position of feeding and discharging ports, it can be divided into Z-type bucket elevator, C-type bucket elevator and T-type bucket elevator, etc. According to the number of discharging ports, it can be divided into single-point hopper elevator and multi-point hopper elevator.
The multi-point bucket elevator can realize multi-point automatic discharge, and can meet the needs of one machine and multiple warehouses. The discharge point can be set freely, and the blanking control can be completed automatically by the equipment.
Product characteristics
1.Sealing operation is pollution-free, the whole machine shell is sealed, there is no leakage during operation, no dust flying, to meet the requirements of environmental protection.
2.To prevent material overflow, it can be equipped with vibrating feeder and uniform feeding with inflow type, which overcomes the phenomenon of full hopper overflow.
3.To prevent material damage, the whole process of feeding, conveying and unloading has no damage to the object itself and reduces the waste rate.
4.Wide range of lifting, less requirements for the types and characteristics of materials. It can not only improve the general powder and small granular material, but also enhance the material with larger grinding ability.
5.Good operation reliability, advanced design principles and processing methods ensure the reliability of the whole machine operation, fault-free time more than 30,000 hours.
6.Long service life, the feeding of the hoist adopts the inflow type, without the need for bucket excavation, and there are few extrusion and collision between materials.
7.It is equipped with backstop device to prevent the hoist from reversing after the equipment stops running due to power failure or other factors.
Working principle
When working, the reducer motor drives two sprockets to move synchronously through bearings, so that the two chains meshing with it move synchronously on the closed track. When the material is transported to the hopper, it slips into the hopper forward horizontally, and then the excess material in the hopper is brushed into the next hopper by the brush of the feeder. Because the material slips into the hopper, it is not forced to scrape, so the material will not be broken. In this way, the hopper between the two chains moves continuously on its closed track through the synchronous movement of the two chains. Under the action of the turning wheel, the hopper turns over, and the material in the hopper falls into the temporary storage bin of the equipment matched with it from the outlet of the hoist.
Specification parameter
|
Model |
Capacity (60% bucket volume) |
Height (m) |
Power (kW) |
Discharge out Quantity |
|
5T-20 |
12 m3/h |
2-15 |
0.75-1.5 |
1-10 |
|
5T-30 |
18 m3/h |
2-15 |
2.2-3 |
1-10 |
You can customize it if you have special requirements.
According to your material name, the output per hour, the height (the distance from the outlet to the ground),the upper and lower horizontal distance can choose the model.
CONTACT US
Tel: 0086-311-87711446
Fax: 0086-311-66635737
WeChat: jasonwei6686
E-mail: marketing@sanli.net.cn
ADD.: Room810,Xiushui Building, 363# North of Zhonghua Str. Shijiazhuang City, Hebei Province, China P.R
