OUR PRODUCTS
T-type Bucket Elevator
Product introduction
The two inlet feeding hopper of T-type bucket elevator are not on the same side, while the outlet hopper are located at the same position above. It is mainly used in the case that two equipment are combined and lifted to the same point.The most typical is: primary color sorting and secondary grain return lifting and conveying, this model can perfectly combine the Z-type bucket elevator with a C-type bucket elevator, which is used for traditional color sorter feeding and lifting, and can reduce the loss of vulnerable parts in the early investment and later use, thus making the cost-performance ratio higher. Zero-damage, high efficiency and high performance are our greatest highlights, making our various types of hoist in sesame, peanut, corn, shrimp, broad beans, melon seeds, beans, chemical raw materials, biomass pellet fuel, organic rice and other kinds of particles, small pieces of materials play an irreplaceable role in the promotion and transportation.
Product characteristics
1.Sealing operation is pollution-free, the whole machine shell is sealed, there is no leakage during operation, no dust flying, to meet the requirements of environmental protection.
2.To prevent material overflow, it can be equipped with vibrating feeder and uniform feeding with inflow type, which overcomes the phenomenon of full hopper overflow.
3.To prevent material damage, the whole process of feeding, conveying and unloading has no damage to the object itself and reduces the waste rate.
4.Wide range of lifting, less requirements for the types and characteristics of materials. It can not only improve the general powder and small granular material, but also enhance the material with larger grinding ability.
5.Good operation reliability, advanced design principles and processing methods ensure the reliability of the whole machine operation, fault-free time more than 30,000 hours.
6.Long service life, the feeding of the hoist adopts the inflow type, without the need for bucket excavation, and there are few extrusion and collision between materials.
7.It is equipped with backstop device to prevent the hoist from reversing after the equipment stops running due to power failure or other factors.
Specification parameter
|
Model |
Capacity (60% bucket volume) |
Height (m) |
Power (kW) |
Discharge out Quantity |
|
5T-15 |
9 m3/h |
2-15 |
0.75-1.5 |
1 |
|
5T-20 |
12 m3/h |
2-15 |
0.75-1.5 |
1-10 |
|
5T-30 |
18 m3/h |
2-15 |
2.2-3 |
1-10 |
You can customize it if you have special requirements.
According to your material name, the output per hour, the height (the distance from the outlet to the ground), the upper and lower horizontal distance can choose the model.
CONTACT US
Tel: 0086-311-87711446
Fax: 0086-311-66635737
WeChat: jasonwei6686
E-mail: marketing@sanli.net.cn
ADD.: Room810,Xiushui Building, 363# North of Zhonghua Str. Shijiazhuang City, Hebei Province, China P.R
