OUR PRODUCTS
C-type Bucket Elevator
Product introduction
The C-type bucket elevator is named for its resemblance to the English letter “C”. The inlet and outlet are located on the same side of the equipment and are widely used in places with limited location or special feeding requirements. If used in conjunction with the gravity separator and color sorer, feeding and recycling can be combined on one side to save working space.
Compared with Z-type bucket elevator, the lifting capacity is relatively large, and it can also meet the requirements of multi-point unloading at any position. The lifting chain adopts a high-strength chain.Our elevator has been widely used in agriculture, chemical industry, plastics, seed, leisure food, renewable resources, hardware and other industries.
Product characteristics
1.Sealing operation is pollution-free, the whole machine shell is sealed, there is no leakage during operation, no dust flying, to meet the requirements of environmental protection.
2.To prevent material overflow, it can be equipped with vibrating feeder and uniform feeding with inflow type, which overcomes the phenomenon of full hopper overflow.
3.To prevent material damage, the whole process of feeding, conveying and unloading has no damage to the object itself and reduces the waste rate.
4.Wide range of lifting, less requirements for the types and characteristics of materials. It can not only improve the general powder and small granular material, but also enhance the material with larger grinding ability.
5.Good operation reliability, advanced design principles and processing methods ensure the reliability of the whole machine operation, fault-free time more than 30,000 hours.
6.Long service life, the feeding of the hoist adopts the inflow type, without the need for bucket excavation, and there are few extrusion and collision between materials.
7.It is equipped with backstop device to prevent the hoist from reversing after the equipment stops running due to power failure or other factors.
T-type C-type Z-type
Specification parameter
|
Model |
Capacity (60% bucket volume) |
Height (m) |
Power (kW) |
Discharge out Quantity |
|
5T-15 |
9 m3/h |
2-15 |
0.75-1.5 |
1 |
|
5T-20 |
12 m3/h |
2-15 |
0.75-1.5 |
1-10 |
|
5T-30 |
18 m3/h |
2-15 |
2.2-3 |
1-10 |
You can customize it if you have special requirements.
According to your material name, the output per hour, the height (the distance from the outlet to the ground), the upper and lower horizontal distance can choose the model.
CONTACT US
Tel: 0086-311-87711446
Fax: 0086-311-66635737
WeChat: jasonwei6686
E-mail: marketing@sanli.net.cn
ADD.: Room810,Xiushui Building, 363# North of Zhonghua Str. Shijiazhuang City, Hebei Province, China P.R
